Using Controls; Welding Modes And Help Selection - Pro-Tec Welding PRO-TEC 215 MP Operating Manual

OPERATION

5.2 Using Controls

(A) Amperage / Wire Speed Adjustment Knob
Rotate Knob left or right to change:
- Amperage in TIG or STICK modes.
- Wire Speed in MIG SYN or MIG MAN modes.
(C) Voltage/Downslope/Arc Force Adjustment Knob
Rotate Knob left or right to change:
- Voltage in MIG SYN or MIG MAN modes.
- Downslope in TIG mode.
- Arc Force in STICK mode.
(E) Inductance/Post Flow Gas Adjustment Knob
Rotate Knob left or right to change:
- Inductance in MIG SYN or MIG MAN modes.
- Post Flow Gas in TIG mode.
(F) Multi-Function Control Selection Knob
Rotate Knob left or right to highlight the desired function then
Push Knob to Select Function.
(I) Memory Button
Push Button to access memory screen then rotate (F) to Select
Memory Location then Push (F) to Save or Recall your favorite
weld program.

5.3 Welding Modes and Help Selection

MIG SYN
Provides built-in MIG weld settings for the selected metal thickness.
Press Multi-Function Control (F) to select MIG SYN.
NOTE 18: Selectable Wire Diameters and Material Thicknesses are
reliant on 120 VAC or 208/230/240 VAC Mains Voltage and machine
amperage range.
 Select
Welding Material Selection
Fe or Ss or Al, or FCAW-S or FCAW-G
 Select
Protective Gas Selection
 Select
Welding Diameter Selection
Model Material 120 VAC
Fe .023/.030''/.035''/.040''
Ss .030''/.040''
215MP Al .035''/.040''
FCAW-S .035''/.040''/.045''
FCAW-G .040''/.045''
Fe .023/.035''/.040''
Ss .030''/.040''
250MP Al .035''/.040''
FCAW-S .035''/.040''/.045''
FCAW-G .040''/.045''
 Select
Welding Type Selection
Operating Manual No: PWOM-215/250MP-001
:
: Mix Gas or CO
2
:
208/230/240 VAC
.023/.030''/.035''/.040''
.030''/.040''
.035''/.040''
.035''/.040''/.045''
.040''/.045''
.023/.030''/.035''/.040''/.045''
.030''/.040''/.045''
.035''/.040''/.045''
.035''/.040''/.045''
.040''/.045''
: 2T or 4T
Page 28
 Select metal
Thickness being welded.
 Ready to weld display in MIG SYN mode.
MIG MAN
(SPOOL GUN)
Use to manually setup for MIG GUN or SPOOL GUN welding.
Press Multi-Function Control (F) to select MIG MAN (SPOOL GUN).
NOTE 18
Refer to .
 Select
Welding Type Selection
 Use Set Up Chart located on door using Material, Wire
Type/Diameter, Shield Gas and Material Thickness to set:
a. Wire Speed (Inch/Min).
b. Voltage (V).
 Ready to weld display in MIG MAN mode.
TIG
Provides built-in TIG weld settings for the selected metal thickness.
Press Multi-Function Control (F) to select TIG.
NOTE 18
Refer to .
 Select
Welding Diameter Selection
1/16''/3/32'' (215MP/250MP) on 120 VAC
1/16''/3/32''/1/8'' (215MP/250MP) on 208/230/240 VAC
 Select
Welding Type Selection
 Select metal
Thickness
being welded.
 Ready to weld display in TIG mode.
: 2T or 4T
:
: 2T or 4T
© 2018 Global Welding LLC