Storage; Disposal - Parkside PKZ 180 C5 Translation Of The Original Instructions

NOTE
This appliance is maintenance free . Never open
the appliance . The appliance may only be re-
paired by an authorised service centre or Cus-
tomer Service . If one of the faults listed below
occurs, note the following:
♦ Disconnect the appliance from any power
supply .
♦ Allow the appliance to cool down and wait a
short while for the residual energy to neutralise .
♦ Ensure that the appliance is in good working
condition .
Troubleshooting
Fault Solution
1 . Appliance 1 . Check your power supply .
does not Check that all cables, fuses and
run the mains socket are in working
order .
2 . Do not use excessively long
extension cables .
3 . Do not use the appliance
at temperatures below +5
degrees .
4 . Avoid overheating the
motor . Allow the motor
to cool down .
2 . Working
Check the seals and the non-return
pressure
valve . Replace these if necessary .
too low
3 . Tools do Check the hoses, quick coupler
not work and the tools . Replace these if
necessary .

Storage

NOTE
► Store the appliance in a dry and secure envir-
onment . Before storage, the appliance and
all connected compressed air tools should
be bled .
■ Disconnect the mains power plug and then
bleed the appliance and all connected com-
pressed air tools .
■ Store the appliance so that it cannot be used by
unauthorised persons .
■ 32 │ GB │ MT

Disposal

The packaging consists of environmentally
friendly material . It can be disposed of in
the local recycling containers .
Do not dispose of power tools in
your normal household waste!
European Directive 2012/19/EU requires that
worn-out power tools be collected separately and
recycled in an environmentally compatible manner .
Your local community or municipal authorities can
provide information on how to dispose of the worn-
out appliance .
Dispose of the packaging in an
environmentally friendly manner .
Note the labelling on the packaging
and separate the packaging material
components for disposal if necessary . The
packaging material is labelled with abbreviations
(a) and numbers (b) with the following meanings:
1–7: Plastics, 20–22: Paper and cardboard,
80–98: Composites
Your local community or municipal
authorities can provide information on
how to dispose of the worn-out
product .
PKZ 180 C5