Step 2; Step 3 - modway EEI -1324 Assembly Instructions Manual

EEI -1324
DESK

STEP 2:

Insert 11pcs Cam Post (a) into the corresponding holes on the bottom of Top Panels (A) as shown.
Use Phillips Head Screwdriver (not included) to tighten the Cam Posts (a) clockwise until secure.
Insert 8pcs Dowel (d) into the corresponding holes on the bottom Top Panels (A) as shown.
Repeat the same steps and hardware for the Bottom Panel (E).
Phillips Head Screwdriver
ax20 dx20

STEP 3:

Insert 11pcs Cam Post (a) into the corresponding holes on the bottom of Top Panels (A) as shown.
Use Phillips Head Screwdriver (not included) to tighten the Cam Posts (a) clockwise until secure.
Insert 8pcs Dowel (d) into the corresponding holes on the bottom Top Panels (A) as shown.
Phillips Head Screwdriver
bx10
( not included)
Customer Service 908-368-1025︱www.modwayfurniture.com
A
( not included)
c
E
Hardware & Tools required
Hardware & Tools required
Page 4 of 7