Advertisement
Quick Links
EEI -1328
DESK
Thank you for purchasing the MODWAY DESK！ ！ ！ ！
Before you start, here is some helpful advice:
1.We suggest you spend a short time reading through this leaflet and then follow the simple step by step
instructions.
2.Owing to the size and weight of the desk, we recommend that it is assembled by two adults, on a carpeted or
padded area, in the room that it is intended for. Approximate assembly time: 45 minutes.
3.Please do not use any tools other than those provided or recommended in these instructions.
4.Please do not throw away any of the packaging or instructions until you have checked all the components and
hardware and the furniture is fully assembled.
5.Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten the
components from time to time, so please save the tools that have been provided.
6.Please keep all pieces out of reach of small children.
Hardware:
a
c
e
g
j
m
m
Customer Service 908-368-1025︱ ︱ ︱ ︱ www.modwayfurniture.com
Cam
x30
Screw M4x35mm
x12
Pull
x2
Screw M4x14mm
x30
Knob
x2
Bolt M6x50mm
x2
Leveler
x4
b
Pull Screw M4x20mm
d
f
h
k
n
Drawer Bottom Holder
p
Cam Post
x30
x6
Drawer Guides
x3 sets
Dowel
x32
Bolt M6x12mm
x12
x6
Allen Wrench
x1
Page 1 of 8
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for modway EEI -1328
Summary of Contents for modway EEI -1328
- Page 1 EEI -1328 DESK Thank you for purchasing the MODWAY DESK！ ！ ！ ！ Before you start, here is some helpful advice: 1.We suggest you spend a short time reading through this leaflet and then follow the simple step by step instructions.
- Page 2 EEI -1328 DESK Component: Left Side Panel Top Panel Left Divide Panel Right Side Panel Left Bottom Panel Right Divide Panel Side Drawer Front Center Bottom Panel Side Right Drawer Side Side Left Drawer Side Side Drawer Bottom Side Drawer Back...
- Page 3 EEI -1328 DESK HOW TO USE CAN AND CAM POST HARDWARE Note cam arrow direction Turn cam clockwise 1/2 turn Note cam arrow direction STEP 1: Place 1pc Side Drawer Front (H1),1pc Side Drawer Back (H4),1pc Left Drawer Side (H2), 1pc Right Drawer Side (H3) and 1pc Side Drawer Bottom (H5) together as shown.
- Page 4 EEI -1328 DESK STEP 2: Place 1pc Center Drawer Front (J1),1pc Center Drawer Back (J4),1pc Center Left Drawer Side (J2), 1pc Center Right Drawer Side (J3) and 1pc Center Drawer Bottom (J5) together as shown. Attach them by 1pc Cam Post (a), 1pc Cam (b), 4pcs Screw (c), tighten the Screws (c) and Cam (b) Attach 2pcs Knob (e) to the Center Drawer Front (H1) by using 2pcs Pull Screw (d).
- Page 5 EEI -1328 DESK STEP 4: Place the Left Side Panel (B), Right Side Panel (C), Left Divide Panel (D) and Right Divide Panel (E) upside down on a carpeted or padded surface. Attach the 3 sets Drawer Guides (f) to the Left Side Panel (B), Right Side Panel (C), Left Divide Panel (D) and Right Divide Panel (E) by using 12pcs Screw (g) as shown.
- Page 6 EEI -1328 DESK STEP 7: Place the Left Divide Panel (D), Right Divide Panel (E) and Center Back Panel (L) to the Center Bottom Panel (G) as shown. Attach them by using 12pcs Cam (b) and 2pc Dowel (h). Use Phillips Head Screwdriver (not included) to tighten the Cams (b) clockwise until secure.
- Page 7 EEI -1328 DESK STEP 9: Please put Assembled Top Panel(A1&A2) upside down on a carpeted or padded surface. Place the Bottom Panel (B) to the assembled Side Panels (C&D), , , , Divide Panels (E&F) and Back Panel (G) as shown.
- Page 8 EEI -1328 DESK STEP 10: Please put the assembled desk’s top upside down on a carpeted or padded surface as shown . Attach assembled Left Leg (M) and Right Leg (N) into the bottom of the Left Bottom Panel (F) and Right Bottom Panel (H) by using 12pcs Blot (k).
- Page 9 EEI -1328 DESK STEP 12: Carefully turn over the desk. Rotate the adjustable feet on bottom of each leg to desired height and leveling according to your floor surface. Assembly is completed. The desk is ready to enjoy now! Customer Service 908-368-1025︱ ︱ ︱ ︱ www.modwayfurniture.com...
Need help?
Do you have a question about the EEI -1328 and is the answer not in the manual?
Questions and answers