ProLights ARCLED5118RGB User Manual page 23

3.3 Menu structure
ARCLED5118RGB allows several operating modes. By the 3 digits display the ARCLED5118RGB shows the
current operating mode and the assigned value. By using the [D] button and [E] button it is possible to set-
up the primary settings.
3.4 Operation in automatic mode
If no DMX control signal is present at the DMX INPUT, the unit independently runs through its show pro-
gramme provided that the mode is switched off:
• Press the [D] button or [E] button to enter Mode 4: when the "P" value will flash on [A] position; and press
the button [UP] to confirm.
• Press the [D] button or [E] button to scrolls through menu options from right to left or from left to right.
• Press the [UP] button when the [B] position will flash fro to set "1-8" value relative to the desired internal
programs.
• Press the [UP] button when the [C] position will flash for to set "0-9" value relative to the parameters of
internal programs.
Note. In automatic mode the unit will be set as Master.
LED Display
Mode
[A]
P Automatic
P Automatic
P Automatic
P Automatic
P Automatic
P Automatic
P Automatic
P Automatic
ARCLED5118RGB
BUILT-IN PROGRAMS
LED Display
Function
[B]
1 Red - Green
2 Blue - Red
3 Green - Blue
4 Red - Green - Blue
Red - Green - Blue -
5
Color Mixing
6 Strobe Color Mixing
7 Strobe Auto
8 Auto
LED Display
Adjustable parameters
[C]
0 - 9 Brightness 100-0%
0 - 9 Brightness 100-0%
0 - 9 Brightness 100-0%
0 - 9 Brightness 100-0%
0 - 9 Brightness 100-0%
Strobe speed adjustable from
0 - 9
slow to fast
Strobe speed adjustable from
0 - 9
slow to fast
0 - 9 Brightness 100-0%
7