Table of Contents
Advertisement
Available languages
Available languages
6
- 3 - FUNCTIONS AND SETTINGS
3.1 Operation
Connect the supplied main cable to a socket (230 V~/50 Hz). Then the unit is ready for operation and can be
operated via a DMX controller or it independently performs its show program in succession. To switch off,
disconnect the mains plug from the socket. For a more convenient operation it is recommended to connect
the unit to a socket which can be switched on and off via a light switch.
3.2 Basic
Access control panel functions using the three panel buttons located directly near the LED Display (fig.4).
Used to access the menu and to scroll through menu options from right to left or navigate
upwards.
Used to access the menu and to scroll through menu options from left to right or navigate
downwards.
UP
Used to increase the value of the current function.
3.3 Menu structure
Mode
1
2
3
4
5
6
7
ARCLED5118RGB
A B
C
Definition
DMX Address Setting
ID
Master/Slave Mode Setting
Built-in Programs
Color
DMX Mode
Dimmer
D
E
UP
Fig.4
LED Display (fig.4)
A
B
C
001-512
d00-d50
SLA
P
1-8
0-9
CL0-CL7
Sta-ArC-Ard-ArS-HSV
SF0-SF3
Advertisement
Table of Contents
