Permobil ROHO AGILITY CARBON Operation Manual page 8

Hardware Selection Part Two: Outer Cane Clamps
Instructions: Select the correct outer cane clamps. Then, continue with "Hardware Attachment".
1. Measure the diameter of your wheelchair canes. Diameter = "X".
2. Select the correct outer cane clamps.
1 in. (2.5 cm)
X =
3/4 in. (2 cm)
X =
Note: The ¾ in. (2 cm)
outer cane clamp has
a "dimple" next to the
opening for the cane
clamp screw.
X ≠ 3/4 in. (2.0 cm)
1 in. (2.5 cm)
Note: An image may not be the actual size of the component.
ROHO AGILITY CARBON Contour Back Support Operation Manual
(x2)
dimple
(x2)
If the diameter (X) of the wheelchair back canes
does not equal ¾ in. (2.0 cm) or 1 in. (2.5 cm), ask
your product provider about compatibility.
6
X
X
Top view
Top view