Reminders - Crystal Video Swift800 Pro User Manual

Reminders

Installing Height and Interval Distance
1. In wide-open and unobstructed conditions, and when using the most optimal
installation methods for antennas, this product's transmission distance can reach
250 meters. In obstructed and non-line-of sight conditions, and when using the least
optimal installation methods for antennas, this product's transmission distance will
decrease.
2. This product's working frequency is 5GHz, its wavelengths are short, and the ground
easily absorbs wireless signals. To guarantee transmission stability, it is recommended
that the transmitter should be 1.5 meters or more from the ground, and the receiver
should be 2 meters or more from the ground.
3. When multiple products are working simultaneously, their working frequency must
be staggered and each of them must be 1 or more frequency away from each other.
For example, one of them can be set at CH5 and another can be set at CH7, while
transmitters must be 2 meters away from each other, and receivers must be 2 meters
away from each other.
4. When this product is working at the same time as other wireless devices, to avoid
these devices from interfering with each others' signals, please adjust the distance
between this product and other wireless devices based on the situation (a
recommended distance is 2 meters or more).
Frequency Setting
When using one of these products, it is recommended to set its working frequency to
between CH5 and CH9. In environments covered by WiFi and other networks, the
spectrum should be at a low occupancy rate, and the frequency will be very stable
(Note: When in RSTP mode, it is recommended to set the frequency at CH1 to CH4
or CH10 to CH11, or the phone will be unable to find the SSID).
19
Cable Connection
a) First connect the video signal cord, and then turn on the power supply.
b) During normal usage, avoid hot swapping the video signal cords.
Product and Antenna Installation
a) This product's antenna cord can be disassembled. Before using it, first install the
antenna. After confirming that it is tightly connected, turn on the power supply.
If the power supply is turned on first, the antenna may eventually damage this product.
b) This product is paired with an L-shaped mount and an arm clamp. Firmly install it
based on its paired devices.
c) This product's antenna should be used facing forwards to optimize its
transmission effects.
Battery Life
Using a Sony NP-F970 as an example: the NP-F940 battery's capacity is 58WH; the
transmitter's power consumption is about 7.5W and the receiver's power consumption
is 6W; the NP-F970 battery can be used to power the transmitter for about 5 to 6 hours;
the NP-F970 battery can be used to power the receiver for about 7 to 8 hours.
Note: The above values are only for reference use; the battery's energy density,
usage environment, and other factors will impact its longevity.
20