Table of Contents
Advertisement
Administration
Firmware
If new versions of the B014-000 firmware is available, it can be downloaded from our website.
To upgrade the firmware, do the following:
1. After downloading the new firmware file to your computer, open the Firmware
configuration dialog.
2. Click the Browse button; navigate to the directory that the new firmware file is in and select it.
3. Click Upload.
4. After the upload completes, enable the Reset on exit checkbox (see p. 14).
5. Click the Logout icon to exit and reset the B014-000.
The Windows Client
Starting Up
To access the B014-000 with the Windows Client software:
1. After you log in, click the Windows Client icon at the left of the web page (see p. 7).
Note: You must have DirectX 7.0 or higher installed on your computer. If not, the Client
program will not load.
2. In the dialog box that comes up, click Open.
Note: 1. If the browser cannot run the program, save it to disk, instead. Then, with your
browser still open to the B014-000 web page, run the file from your disk.
2. If you use the save to disk method, for security purposes, you cannot simply run
a previously downloaded version of the program. Each time you want to access the
B014-000, you must log in to the web page with a valid username and password
to download a fresh copy of the program.
3. When a connection to the B014-000 has been established, the following screen appears:
15
Advertisement
Table of Contents
