Table of Contents
Advertisement
Administration
Network
The Network dialog is used to specify the B014-000's network environment.
The page is divided into three panels: Access Port; IP Address; and Log Server.
Access Port
If a firewall is being used, the Administrator can specify the port numbers that the firewall will
allow (and set the firewall accordingly). Users must specify the port number as part of the IP
address when they log in to the B014-000. If an invalid port number (or no port number) is
specified, the B014-000 will not be found.
Note: If there is no firewall (on an Intranet, for example), it doesn't matter what these numbers
are set to, since they have no effect.
An explanation of the fields is given in the table below:
Program
Java
IP Address
The B014-000 uses a fixed IP Address. The default address is 192.168.1.101.
You can however assign it a different address by keying a new address into the IP address field.
The valid address ranges are:
192.168.1.1 ~ 192.168.1.89; and 192.168.102 ~ 192.168.1.255
Note: Addresses 192.168.1.90 to 192.168.1.100 cannot be used. They are reserved for system
diagnostics.
This is the port number that must be specified when connecting from the
Administrator and Windows Client software programs. Valid entries are from
1024 - 60,000. The default is 9000.
This is the port number used for Java Client connections. Valid entries are
from 0 - 65535. The default is 9002.
10
Advertisement
Table of Contents
