Safety information Before installing, powering up, or servicing the Jumbo RGBW led-bar, it is highly recommended that you read this manual and ensure yourself that you completely understand its content. Observe the safety precautions in this manual. Install and operate the led-unit only as described in this manual, and in conformity with local regulations.
It might be necessary to allow the led-bar to cool down for 5 minutes, before servicing. Do not modify the led-fixture, in a way, not described in this manual. Jumbo LUX LUMEN - Kernenergiestraat 53A - 2610 WILRIJK - BELGIUM p.6/17 T: +32 3 293 35 50 – www.lux-lumen.com...
This led-lighting device is manufactured in compliance with directive of the European community: waste electrical and electronically equipment. Please help to preserve our environment and ensure that this Jumbo RGBW Led- bar will be recycled properly at the end of its life.
Physical installation Thank you for selecting this Jumbo RGBW led-bar as best solution in your setup. Warning! Read the safety precautions in this manual before integrating this led-bar into your installation. Installation must be carried out by qualified professionals only.
External connections 5.1 Current power input Safety precautions Never connect the live power on the input terminals of the Jumbo RGBW led-bar! In case of doubts, contact your point of sale. Polarity The Jumbo RGBW led-bar is polarity sensitive. So observe polarity and cabling: •...
Page 10
Please ensure yourself that the cable end is watertight sealed at the connection. If this is not properly done, water can pass through the inner conductors of the cable and damage the internal electronics of the Jumbo RGBW led-bar. Jumbo LUX LUMEN - Kernenergiestraat 53A - 2610 WILRIJK - BELGIUM p.10/17...
EMC and safety requirements The Jumbo RGBW led-bar is fully compliant to the LVD and EMC directive of the European council, if used in a properly designed setup. The Jumbo RGBW led-bar is only intended to be used in lighting...
The Jumbo RGBW led-bar is a robust, compact and efficient solution for lighting of wide surfaces or big objects. The ingress protection of this Jumbo RGBW led-bar is IP67, and as such, the unit can be used in outdoor as well as indoor applications.
Extensive dirt, and particle build-up degrades performance, may cause overheating can result in damaged led-unit and power supplies. Damage by inadequate cleaning or maintenance is not covered by the Jumbo RGBW led-bar warranty. Never use solvents to clean the outer housing of the unit.
Lux Lumen Kernenergiestraat 53 A 2610 Wilrijk Belgium Any cost of secure transportation of the Jumbo RGBW led-bar to and from Lux Lumen service department, will be borne by the customer. Limitations Lux Lumen will not warrant the following: • Periodic check-ups, maintenance and repair or replacement of parts due to normal wear and tear.
Page 15
Jumbo RGBW Led-bar is not rated to be used in severe conditions, indicated by its IP and IK degree, mentioned in the Jumbo RGBW Led-bar specifications in this manual.
Customer sends material (include a copy of the RMA document with the material) Step 4: Lux Lumen evaluates and informs the client if repair is under warranty, or – if not - makes an offer for repair to the client. Jumbo LUX LUMEN - Kernenergiestraat 53A - 2610 WILRIJK - BELGIUM p.16/17...
Need help?
Do you have a question about the Jumbo and is the answer not in the manual?
Questions and answers