The dimensions of the main housing, a cylindrical aluminum lathed part, is Ø35mm with 108 mm length (snoot included). The height on bracket: 73 mm StarEye Midi LUX LUMEN - Kernenergiestraat 53A - 2610 WILRIJK - BELGIUM p.4/18 T: +32 3 293 35 50 – www.lux-lumen.com...
Safety information Before installing, powering up, or servicing the StarEye Midi led-unit, it is highly recommended that you read this manual and ensure yourself that you completely understand its content. Observe the safety precautions in this manual. Install and operate the led-unit only as described in this manual, and in conformity with local regulations.
It might be necessary to allow the led-unit to cool down for 5 minutes, before servicing. Do not modify the LED fixture, in a way, not described in this manual. StarEye Midi LUX LUMEN - Kernenergiestraat 53A - 2610 WILRIJK - BELGIUM p.6/18 T: +32 3 293 35 50 – www.lux-lumen.com...
In case of problems, or doubts, please contact your point of sale. Track mounting (on demand) The StarEye Midi can be equipped with a track adaptor in order to be installed easily on 24 VDC track systems. 4.3 Location and orientation This led-unit can be used in all directions.
4.4 Adjusting the intensity – version PWM dimmable The StarEye Midi has a built-in step-down convertor. The StarEye Midi is dimmable with a PWM 24 VDC constant voltage power supply or Lux Lumen constant voltage DMX LED driver. Preferred PWM power supply’s: ➢...
Using a small screw driver it is possible to turn the integrated potentiometer to adjust the intensity of the StarEye Midi. StarEye Midi LUX LUMEN - Kernenergiestraat 53A - 2610 WILRIJK - BELGIUM p.10/18 T: +32 3 293 35 50 – www.lux-lumen.com...
External connections 5.1 DC power input Safety precautions Never connect the live power on the input terminals of the StarEye Midi led- unit! In case of doubts, contact your point of sale. Polarity The StarEye Midi led-unit is polarity sensitive. So observe polarity and cabling: •...
EMC and safety requirements The StarEye Midi led-unit is fully compliant to the LVD and EMC directive of the European council, if used in a properly designed setup. The StarEye Midi led-unit is only intended to be used in lighting applications,...
Installation setup 7.1 Specification The StarEye Midi led-unit is a small and efficient solution for detail lighting. The ingress protection of the StarEye Midi led-unit is IP65 (PWM dimmable version). The ingress protection rates down to IP20 for the version with integrated potentiometer.
Never use solvents to clean the outer housing of the unit. Never use water, or wet cloth. StarEye Midi LUX LUMEN - Kernenergiestraat 53A - 2610 WILRIJK - BELGIUM p.14/18 T: +32 3 293 35 50 – www.lux-lumen.com...
Lux Lumen Kernenergiestraat 53 A 2610 Wilrijk Belgium Any cost of secure transportation of the product to and from Lux Lumen service department, will be borne by the customer. Limitations Lux Lumen will not warrant the following: • Periodic check-ups, maintenance and repair or replacement of parts due to normal wear and tear.
IP and IK degree, mentioned in the product specifications in this manual. Repairs, modifications or cleaning carried out by a non Lux Lumen service centre. Use of spare parts, software or consumables, which are not compatible with the product.
Page 17
Customer sends material (include a copy of the RMA document with the material) Step 4: Lux Lumen evaluates and informs the client if repair is under warranty, or – if not - makes an offer for repair to the client. StarEye Midi LUX LUMEN - Kernenergiestraat 53A - 2610 WILRIJK - BELGIUM p.17/18...
Need help?
Do you have a question about the StarEye Midi and is the answer not in the manual?
Questions and answers