Symbols Following symbols are used to identify important safety information on the product and in this manual. SquareEye spot LUX LUMEN - Kernenergiestraat 53A - 2610 WILRIJK - BELGIUM p.5/17 T: +32 3 293 35 50 – www.lux-lumen.com...
It might be necessary to allow the led-unit to cool down for 5 minutes, before servicing. Do not modify the led-fixture, in a way, not described in this manual. SquareEye spot LUX LUMEN - Kernenergiestraat 53A - 2610 WILRIJK - BELGIUM p.6/17 T: +32 3 293 35 50 – www.lux-lumen.com...
In case of problems, or doubts, please contact your point of sale. Location and orientation This SquareEye Spot can be used in all directions. SquareEye spot LUX LUMEN - Kernenergiestraat 53A - 2610 WILRIJK - BELGIUM p.8/17 T: +32 3 293 35 50 – www.lux-lumen.com...
Please note, never apply a 12 V or 24 V DC directly to the units. This will damage the units permanently. Preferred power supply: ➢ Lux Lumen 12 channel 700mA, a highly suitable DMX led-driver with the proper 48 VDC power supply • Max. SquareEye Spot led-units: 3 pcs •...
Page 10
IP67 for a complete system. The SquareEye Spot can be delivered with suitable IP67 connectors (on request). Please contact your point of sale. SquareEye spot LUX LUMEN - Kernenergiestraat 53A - 2610 WILRIJK - BELGIUM p.10/17 T: +32 3 293 35 50 – www.lux-lumen.com...
To achieve this compliance, a proper power supply must be supplied. In case of doubts, contact your point of sale. SquareEye spot LUX LUMEN - Kernenergiestraat 53A - 2610 WILRIJK - BELGIUM p.11/17 T: +32 3 293 35 50 – www.lux-lumen.com...
By using lenses the light output angle can be chosen: o Spot: 15° o Medium: 24° o Wide: 31° o Asymmetrical: 43° x 16° SquareEye spot LUX LUMEN - Kernenergiestraat 53A - 2610 WILRIJK - BELGIUM p.12/17 T: +32 3 293 35 50 – www.lux-lumen.com...
Never use solvents to clean the outer housing of the unit. SquareEye spot LUX LUMEN - Kernenergiestraat 53A - 2610 WILRIJK - BELGIUM p.13/17 T: +32 3 293 35 50 – www.lux-lumen.com...
Lux Lumen Kernenergiestraat 53 A 2610 Wilrijk Belgium Any cost of secure transportation of the product to and from Lux Lumen service department, will be borne by the customer. Limitations Lux Lumen will not warrant the following: • Periodic check-ups, maintenance and repair or replacement of parts due to normal wear and tear.
Page 15
IP and IK degree, mentioned in the product specifications in this manual. Repairs, modifications or cleaning carried out by a non Lux Lumen service centre. Use of spare parts, software or consumables, which are not compatible with the product.
Customer sends material (include a copy of the RMA document with the material) Step 4: Lux Lumen evaluates and informs the client if repair is under warranty, or – if not - makes an offer for repair to the client. SquareEye spot LUX LUMEN - Kernenergiestraat 53A - 2610 WILRIJK - BELGIUM p.16/17...
Need help?
Do you have a question about the SquareEyeSpot and is the answer not in the manual?
Questions and answers