Safety information Before installing, powering up, or servicing the StarEye Maxi led-unit, it is highly recommended that you read this manual and ensure yourself that you completely understand its content. Observe the safety precautions in this manual. Install and operate the led-unit only as described in this manual, and in conformity with local regulations.
It might be necessary to allow the led-unit to cool down for 5 minutes, before servicing. Do not modify the led-fixture, in a way, not described in this manual. StarEye Maxi IP67 LUX LUMEN - Kernenergiestraat 53A - 2610 WILRIJK - BELGIUM p.6/18 T: +32 3 293 35 50 – www.lux-lumen.com...
Please help to preserve our environment and ensure that this product will be recycled properly at the end of its life. StarEye Maxi IP67 LUX LUMEN - Kernenergiestraat 53A - 2610 WILRIJK - BELGIUM p.7/18 T: +32 3 293 35 50 – www.lux-lumen.com...
Physical installation Thank you for selecting this StarEye Maxi led-unit as best solution in your setup. Warning! Read the safety precautions in this manual before integrating this led-unit into your installation. Installation must be carried out by qualified professionals only.
4.4 Adjusting of intensity The StarEye Maxi led-unit has a built-in step-down convertor. The StarEye Maxi led-unit is dimmable with a PWM 24 VDC constant voltage power supply or Lux Lumen constant voltage DMX led-driver. Preferred PWM power supply’s: ➢ OT 80/220…240/24 DIM P 80W 24vDC •...
External connections 5.1 DC power input Safety precautions Never connect the live power on the input terminals of the StarEye Maxi led- unit! In case of doubts, contact your point of sale. Polarity The StarEye Maxi led-unit is polarity sensitive. So observe polarity and cabling: •...
EMC and safety requirements The StarEye Maxi led-unit is fully compliant to the LVD and EMC directive of the European council, if used in a properly designed setup. The StarEye Maxi led-unit is only intended to be used in lighting...
7.1 Specification The StarEye Maxi led-unit is a small and efficient solution for detail lighting. The ingress protection of this StarEye Maxi led-unit is IP67, and as such, the led-unit can be used in outdoor as well as indoor applications.
Never use solvents to clean the outer housing of the unit. Never use water, or wet cloth. StarEye Maxi IP67 LUX LUMEN - Kernenergiestraat 53A - 2610 WILRIJK - BELGIUM p.13/18 T: +32 3 293 35 50 – www.lux-lumen.com...
Screw the front cover onto the housing clockwise. Do not displace the rubber band to prevent fluid ingress StarEye Maxi IP67 LUX LUMEN - Kernenergiestraat 53A - 2610 WILRIJK - BELGIUM p.14/18 T: +32 3 293 35 50 – www.lux-lumen.com...
Lux Lumen Kernenergiestraat 53 A 2610 Wilrijk Belgium Any cost of secure transportation of the product to and from Lux Lumen service department, will be borne by the customer. Limitations Lux Lumen will not warrant the following: • Periodic check-ups, maintenance and repair or replacement of parts due to normal wear and tear.
Page 16
IP and IK degree, mentioned in the product specifications in this manual. Repairs, modifications or cleaning carried out by a non Lux Lumen service centre. Use of spare parts, software or consumables, which are not compatible with the product.
Customer sends material (include a copy of the RMA document with the material) Step 4: Lux Lumen evaluates and informs the client if repair is under warranty, or – if not - makes an offer for repair to the client. StarEye Maxi IP67 LUX LUMEN - Kernenergiestraat 53A - 2610 WILRIJK - BELGIUM p.17/18...
Need help?
Do you have a question about the StarEye Maxi and is the answer not in the manual?
Questions and answers