Safety information Before installing, powering up, or servicing the BigEye led-unit, it is highly recommended that you read this manual and ensure yourself that you completely understand its content. Observe the safety precautions in this manual. Install and operate the led-unit only as described in this manual, and in conformity with local regulations.
It might be necessary to allow the led-unit to cool down for 5 minutes, before servicing. Do not modify the led-fixture, in a way, not described in this manual. BigEye IP67 LUX LUMEN - Kernenergiestraat 53A - 2610 WILRIJK - BELGIUM p.6/16 T: +32 3 293 35 50 – www.lux-lumen.com...
Physical installation Thank you for selecting this BigEye led-unit as best solution in your setup. Warning! Read the safety precautions in this manual before integrating this led-unit into your installation. Installation must be carried out by qualified professionals only. Assure yourself that there is sufficient and unrestricted air flow around the BigEye led-unit.
5.1 Current power input Safety precautions Never connect the live power on the input terminals of the BigEye led-unit! The BigEye led-unit can only be used by a correct 700mA led driver. In case of doubts, contact your point of sale. Polarity The BigEye led-unit is polarity sensitive.
EMC and safety requirements The BigEye led-unit is fully compliant to the LVD and EMC directive of the European council, if used in a properly designed setup. The BigEye led-unit is only intended to be used in lighting applications, and...
The Led-PCB contains powerful leds: 8x Red, 8x Green and 8x Blue. The ingress protection of this BigEye led-unit is IP67, and as such, the unit can be used in outdoor as well as indoor applications. The housing is made out of solid aluminium which serves as cooler as well.
Never use solvents to clean the outer housing of the unit. BigEye IP67 LUX LUMEN - Kernenergiestraat 53A - 2610 WILRIJK - BELGIUM p.12/16 T: +32 3 293 35 50 – www.lux-lumen.com...
Lux Lumen Kernenergiestraat 53 A 2610 Wilrijk Belgium Any cost of secure transportation of the product to and from Lux Lumen service department, will be borne by the customer. Limitations Lux Lumen will not warrant the following: • Periodic check-ups, maintenance and repair or replacement of parts due to normal wear and tear.
Page 14
IP and IK degree, mentioned in the product specifications in this manual. Repairs, modifications or cleaning carried out by a non Lux Lumen service centre. Use of spare parts, software or consumables, which are not compatible with the product.
Customer sends material (include a copy of the RMA document with the material) Step 4: Lux Lumen evaluates and informs the client if repair is under warranty, or - if not - makes an offer for repair to the client. BigEye IP67 LUX LUMEN - Kernenergiestraat 53A - 2610 WILRIJK - BELGIUM p.15/16...
Need help?
Do you have a question about the BigEye and is the answer not in the manual?
Questions and answers