Safety information Before installing, powering up, or servicing the StarWay led-luminaire, it is highly recommended that you read this manual and ensure yourself that you completely understand its content. Observe the safety precautions in this manual. Install and operate the led-luminaire only as described in this manual, and in conformity with local regulations.
It might be necessary to allow the led-luminaire to cool down for 5 minutes, before servicing. Do not modify the led-fixture, in a way, not described in this manual. StarWay LUX LUMEN - Kernenergiestraat 53A - 2610 WILRIJK - BELGIUM p.6/16 T: +32 3 293 35 50 – www.lux-lumen.com...
Physical installation Thank you for selecting this StarWay led-luminaire as best solution in your setup. Warning! Read the safety precautions in this manual before integrating this led-luminaire into your installation. Installation must be carried out by qualified professionals only. Assure yourself that there is sufficient and unrestricted air flow around the StarWay led-luminaire.
In case of inversed polarity, the warranty is void. Power supply: Rated voltage The rated input voltage range of the StarWay Led-fixture is 24 VDC. Due to the use of a step down-convertor, integrated in the housing, a highly efficient system is created.
EMC and safety requirements The StarWay led-luminaire is fully compliant to the LVD and EMC directive of the European council, if used in a properly designed setup. The StarWay led-luminaire is only intended to be used in lighting applications, and as such, the complete assembly of led-luminaire and...
Installation setup 7.1 Specification The StarWay led-luminaire is a modern and slim designed solution for outdoor path lighting. The StarWay is an upstanding led-luminaire with a mounting plate containing threaded groundpins on a pin holder under the visible surface. The ingress protection of this StarEye led-unit is IP65, and as such, the unit can be used in outdoor as well as indoor applications.
Damage by inadequate cleaning or maintenance is not covered by the product warranty. Never use solvents to clean the outer housing of the unit. Never use water, or wet cloth. StarWay LUX LUMEN - Kernenergiestraat 53A - 2610 WILRIJK - BELGIUM p.12/16 T: +32 3 293 35 50 – www.lux-lumen.com...
Lux Lumen Kernenergiestraat 53 A 2610 Wilrijk Belgium Any cost of secure transportation of the product to and from Lux Lumen service department, will be borne by the customer. Limitations Lux Lumen will not warrant the following: • Periodic check-ups, maintenance and repair or replacement of parts due to normal wear and tear.
IP and IK degree, mentioned in the product specifications in this manual. Repairs, modifications or cleaning carried out by a non Lux Lumen service centre. Use of spare parts, software or consumables, which are not compatible with the product.
Page 15
Customer sends material (include a copy of the RMA document with the material) Step 4: Lux Lumen evaluates and informs the client if repair is under warranty, or – if not - makes an offer for repair to the client. StarWay LUX LUMEN - Kernenergiestraat 53A - 2610 WILRIJK - BELGIUM p.15/16...
Need help?
Do you have a question about the StarWay and is the answer not in the manual?
Questions and answers