Safety information Before installing, powering up, or servicing the JUMBO RGBW LED BAR, it is highly recommended that you read this manual and ensure yourself that you completely understand its content. Observe the safety precautions in this manual. Install and operate the led-unit only as described in this manual, and in conformity with local regulations.
Do not modify the LED fixture, in a way, not described in this manual. PRODUCT NAME p.6/16 LUX LUMEN - Kernenergiestraat 53A - 2610 WILRIJK - BELGIUM T: +32 3 293 35 50 – F: +32 3 293 35 44 www.lux-lumen.com...
This led-lighting device is manufactured in compliance with directive of the European community: waste electrical and electronically equipment. Please help to preserve our environment and ensure that this Jumbo RGBW LED bar will be recycled properly at the end of its life.
Physical installation Thank you for selecting this Jumbo RGBW LED bar as best solution in your setup. Warning! Read the safety precautions in this manual before integrating this led-unit into your installation. Installation must be carried out by qualified professionals only.
External connections 5.1 DC power input Safety precautions Never connect the live power on the input terminals of the Jumbo RGBW LED bar! In case of doubts, contact your point of sale. Polarity The JUMBO RGBW LED BAR is polarity sensitive. So observe polarity and cabling: •...
EMC and safety requirements The JUMBO RGBW LED BAR is fully compliant to the LVD and EMC directive of the European council, if used in a properly designed setup. EMC requirements of the power supply The JUMBO RGBW LED BAR is only intended to be used in lighting applications, and as such, the complete assembly of led-unit and power supply needs to be fully compliant with the harmonized standards.
Installation setup 7.1 Specification The Jumbo LED RGBW luminaire is 60cm long with 36 LEDs, 16mm pitch between. • Power consumption: +/-80W • Input current: 700mA • Mechanical connection: Bracket • LED color: RGB+W • Possible optical opening angle: o 43° x 16° elliptical o 40°...
Extensive dirt, and particle build-up degrades performance, may cause overheating can result in damaged led-unit and power supplies. Damage by inadequate cleaning or maintenance is not covered by the Jumbo RGBW LED bar warranty. Never use solvents to clean the outer housing of the unit.
Lux Lumen Kernenergiestraat 53 A 2610 Wilrijk Belgium Any cost of secure transportation of the Jumbo RGBW LED bar to and from Lux Lumen service department, will be borne by the customer. Limitations Lux Lumen will not warrant the following: •...
Page 14
Jumbo RGBW LED bar is not rated to be used in severe conditions, indicated by its IP and IK degree, mentioned in the Jumbo RGBW LED bar specifications in this manual.
9.2 RMA procedure To send material back to Lux Lumen, you need a RMA (Return Material Authorization) document that you will receive from Lux Lumen. Without the RMA document, we cannot accept the material. The procedure to obtain a RMA:...
Need help?
Do you have a question about the Jumbo and is the answer not in the manual?
Questions and answers