Technical Specifications - Telstra 5G WI-FI PRO MU500 User Manual

TECHNICAL SPECIFICATIONS

Network compatibility
Chipset
Wi-Fi
Dimensions
Data Rates*
Battery
Operating Time**
Connectivity
Current
Operating systems
Antenna ports
SIM Card
Temperature
* Download speeds will vary due to distance from the cell, local conditions, user numbers, file source,
hardware, software and other factors.
** Operation and Standby times depend on a number of conditions and are measured in ideal
conditions.
Copyright © 2020. All rights reserved.
No part of this publication may be excerpted, reproduced, translated or utilized in any form or by any
means, electronic or mechanical, including photocopying and microfilm, without the prior written
permission of ZTE Corporation.
The manual is published by ZTE Corporation. We reserve the right to make modifications on errors or
update specifications without prior notice.
The worst case simultaneous Wi-Fi and RF SAR result for this device is published on
ztemobiles.com.au/MF500.htm
Search 'ZTE Australia' on Facebook and Twitter to keep in touch.
Version 1.0 May 2020
5G mmW n258, Sub 6G n78, n5, n7
LTE Band 1, 3, 7, 8, 28
UMTS 850, 2100 MHz
SDX55 + QCA6391
802.11a/b/g/n/ac/ax 2*2 MIMO
133 x 73 x 18.5mm, 230g
5G download speeds depend on available network
conditions and combinations.
LTE download speeds up to 2Gb/s
HSPA+ Downlink up to 42Mb/s
4500mAh internal battery, user replaceable
Active battery up to 8 hours. Standby time up to 400
hrs.
Charging and tethered modem port USB-C 3.1,
LAN interface
Resting: 100mA rms
Max: 500mA rms
Any Wi-Fi enabled device,
Windows 10, 8,
MAC OS X 10.7 and above
Dual TS9 connectors
Nano SIM, 4FF
-5ºC to +40ºC
Page 26 of 26