Telstra 5G WI-FI PRO MU500 User Manual page 15

SETTINGS > WI-FI SETTINGS > ADVANCED SETTINGS
 You can customise the Wi-Fi settings to suit personal preferences or attaching device requirements.
 Press Apply to save your changes
 Press the Help icon
SETTINGS > WI-FI SETTINGS > WPS
 WPS uses the push button on the front panel to connect seamlessly to supported devices.
 Press WPS to enable. WPS compatible devices can connect to your Wi-Fi network without
authorisation. Alternatively, you can set a PIN if required.
 Once enabled, WPS will be available for 2 minutes with the device LED's will flash to indicate WPS
mode.
 If you have enabled PIN mode then you need to enter the same PIN on devices you wish to connect.
 Press the Help icon
to get in context tips
to get in context tips
Page 15 of 26