Telstra 5G WI-FI PRO MU500 User Manual page 18

 With automatic update enabled, this means when the device detects a new software is available, the
software update will be downloaded. The device will wait until there is no mobile data activities for
15 minutes, or the next device power on/off to trigger the software update installation. This will
minimise the possible downtime on your mobile data usage with the software update.
 With Check for New Version enabled you are notified in the web user interface if there is an update
available.
 You need to be connected to mobile data to download new software updates.
 Press the Update Now button to see if there are software updates for your device.
 Updates are disabled by default when roaming to minimize potential high data charges. Check the
Roaming box to enable updates when roaming if required.
 Press the Help icon
 Example software update notification:
SETTINGS > FIREWALL > PORT FILTERING
 Select Enable to turn on Port Filtering feature
 You can apply filters based on MAC address, source IP address, destination IP address and select the
action to deny or accept the data packets.
 It is recommended not to change the Firewall settings to avoid interfering mobile data usage. Firewall
settings are recommended to be configured by advanced users or your organisation IT department.
 Press the Help icon
to get in context tips
to get in context tips
Page 18 of 26