Warranty Certificate; Warranty Conditions - Ferro GPD Series Installation And Operation Manual

WARRANTY CONDITIONS

1. FERRO S.A. company provides a 24-month warranty for a correct operation of the
Ferro pump in agreement with its application and technical conditions specified in the
Instruction Manual, and 6-month warranty for repairs and used spareparts. Warranty
period starts on the final user purchase date. Warranty applies on the territory of Po-
land, for other countries seller is responsible for any warranty certificates.
2. The warranty certificate must be completed and stamped by the seller and the instal-
lation company which installed the pump; an incomplete warranty certificate is invalid.
3. The seller is obliged to show the product when selling it; potential later claims regard-
ing surface damage will not be accepted.
4. The customer will make a legitimate claim in the organization where he has bought the
product or directly in the FERRO S.A. company. In case of a claim, he will submit a duly
completed Warranty Certificate together with a purchase receipt ; the claim will not be
accepted unless valid documents are submitted.
5. The warranty covers only flaws provably caused by the manufacturer, not by incorrect
or incompetent installation, a failure to satisfy all instructions specified in the User's
Manual, flaws caused by impurities in the distribution system, freezing, mechanical
damages etc.
6. The warranty does not cover damages caused during transport, unsuitable storage or
improper usage of the product.
7. The warranty does not cover parts that are subject to natural wear caused by standard
application as well as all faults caused by dirts carried by pumped liquid. Usage of
proper filter at the pump's inlet is mandatory.
8. The warranty cannot be accepted after any unauthorized interference with the product.

WARRANTY CERTIFICATE

EN