Test Engine Start/On/Off Switch; Test Emergency Stop - Skyjack SJ40T Operating Manual

Section 2 - Familiarization
Engine Start/On/
Off Switch
•

Test Engine Start/On/Off Switch

1. Ensure engine is running.
2. Select " " off position from engine start/
on/off switch.
Result: Engine should shut down and
platform control console is disabled.
3. Select " " on position from engine start/
on/off switch.
Result: Platform control console is
enabled.
4. Start engine by selecting "
position from engine start/on/off switch.
•

Test Emergency Stop

1. Ensure engine is running.
2. Push in " " emergency stop button.
Result: Engine should shut down and
aerial platform functions should not
operate.
• Test Steering
1. Pull out " " emergency stop button.
SJ 40T & SJ 45T
SJ 61T & SJ 66T
It is the responsibility of the operator to read, completely understand and follow all instructions and warnings
Emergency Stop
Horn
" start
contained in this operating manual and on the aerial platform.
Emergency Power
Switch
Platform Leveling
Override Switch
2. Start engine by selecting "
position from engine start/on/off switch.
3. Depress and hold footswitch.
4. Press rocker switch on top of drive/steer
controller to " " left and "
Result: Steer wheels should turn left and
right.
• Test Driving Function
1. Ensure path of intended motion is clear.
2. Ensure boom is in stowed position and fly
boom fully retracted.
3. Depress and hold footswitch.
4. Slowly move drive/steer controller in
" " forward or "
until aerial platform begins to move, and
then return handle to center position.
Result: Aerial platform should move in
forward or reverse direction, and then
come to a stop.
Function Tests
Drive/Steer
Controller
" start
" right.
" reverse direction
Page 35