Assembly - Kemper MaxiFil Operating Manual

5 Assembly

NOTICE
The product operator may only assign the independent assembly of the product to
personnel who are familiar with this task.
Two people are needed to assemble the product.
You must ensure that the welding current return line between the workpiece and
the welding machine has a low resistance and that connections between the
workpiece and the product are avoided so that the welding current cannot flow
back to the welding machine via the product's protective conductor.
NOTE
If add-on products are also provided, follow the appropriate manuals when
assembling them.
Pos. Designation
1 Filter component
2 Gasket ring
3 Sealing cap
1502762-00
Fig. 10: Assembly
Tab. 11: Assembly
- 55 -
EN
Quantity
1
1
1