System Memory; Installing The So-Dimm Module - DFI GH551 User Manual

X System Memory
DDR4 SO-DIMM
(Bottom Side)
1
The system board supports one single channel DDR4 SO-DIMM memory module.
Single Channel (SC)
Data will be accessed in chunks of 64 bits from the memory channels.
Features
• 1 x 260-pin SODIMM up to 16GB
• Single Channel DDR4 up to 2400MHz
User's Manual | GH551
10 9
1
2 1
1
1
1
1
1
2 6
1 5
2 6
1 5
1
39 40
1 2
10
2 1
5
2 1
1
9 1 9 1
1
10 2 1 2

System Memory

X

Installing the SO-DIMM Module

Before installing the memory module, please make sure that the following safety cautions are
well-attended.
1. Make sure the PC and all other peripheral devices connected to it has been powered
down.
2. Disconnect all power cords and cables.
3. Locate the SO-DIMM socket on the system board
4. Make sure the notch on memory card is aligned to the key on the socket.
Retention Notch
Notch
Retention Clip
Key
4 5 °
Step 1
Chapter 2
HARDWARE INSTALLATION
DDR4 SO-DIMM
Socket Top View
9