Csm Configuration; Security - DFI GH551 User Manual

Advanced
X

CSM Configuration

Aptio Setup Utility - Copyright (C) 2020 American Megatrends, Inc.
Advanced
CSM Configuration
CSM Support [Enabled]
CSM16 Module version 07.83
Boot option filter [UEFI only]
Option ROM execution
Network [Do not launch]
Storage [UEFI]
Video [UEFI]
Other PCI devices [UEFI]
Version 2.20.1274. Copyright (C) 2020 American Megatrends, Inc.
CSM Support
This section is used to enable or disable CSM Support. The following fields are only available
when "CSM Support" is enabled.
Boot option filter
This field controls Legacy/UEFI ROMs priority.
Network
This field controls the execution of UEFI and Legacy Network OpROM.
Storage
This field controls the execution of UEFI and Legacy Storage OpROM.
Video
This field controls the execution of UEFI and Legacy Video OpROM.
Other PCI devices
This field determines OpROM execution policy for devices other than Network, Storage or
Video.
User's Manual | GH551
X Security
Main
Enable/Disable CSM Sup-
Password Description
port.
If ONLY the Administrator's password is set,
then this only limits access to Setup and is
only asked for when entering Setup.
If ONLY the User's password is set, then this
is a power on password and must be entered
to boot or enter Setup. In Setup the User will
have Administrator rights.
The password length must be
in the following range:
Minimum length
→←: Select Screen Maximum length
↑↓: Select Item
Enter: Select Administrator Password
+/- : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
Administrator Password
Set the administrator password. To clear the password, input nothing and press enter when a
new password is asked. Administrator Password will be required when entering the BIOS.
Aptio Setup Utility - Copyright (C) 2020 American Megatrends, Inc.
Advanced Chipset

Security

Boot Save & Exit
3
20
Version 2.20.1274. Copyright (C) 2020 American Megatrends, Inc.
Chapter 3
BIOS SETTINGS
S e t A d m i n i s t r a t o r P a s s -
word
→←: Select Screen
↑↓: Select Item
Enter: Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
35