Ingersoll-Rand ESCB10 Parts Bulletin

03535259
Form P6826
Edition 1
MODEL ESCB1O
ELECTRIC SCREWDRIVER CONTROLLER
(DELVO)
WARNING
Disconnect the Controller Power Cord from the receptacle before performing any maintenance on this
Controller.
Do not attempt to repair this Controller unless you are a qualified electrician.
When using elect ric tools, basic safety precautions should always be followed to reduce the risk of fire,
electric shock and personal injury, including the following:
1.
2.
3.
4.
5.
6.
7.
Keep work area clean.
Cluttered areas and benches invite injuries.
Consider work area environment.
Don't expose the Controller to water.
Keep work area well lit.
Guard against electric shock.
Prevent body contact with grounded surfaces,
such as pipes, metal structures or other electrical
products.
Keep bystanders away.
Do not permit unauthorized personnel to operate this Controller.
Store idle tools.
When not in use. the Controller should be stored in a dry, and secured area.
Don't abuse cord.
Never carry a Controller by its cord or yank the cord of the Controller to disconnect it from a recep-
tacle.
Keep cord from heat, oil, solvent and sharp edges.
Maintain Controller with care.
Inspect Controller cord periodically and if damaged, have repaired by authorized service facility.
Notice: The use of other than genuine Ingersoll-Rand replacement parts may result in decreased tool
performance and increased maintenance, and may invalidate all warranties.
INGERSOLL-RAND~
@ Ingersoll-Rand Company 1986
PROFESSIONALTOOLS