Advertisement
Testing the Cutter
The printer features a diagnostics menu that allows the function of the Cutter option to be verified. During
testing, results will be displayed in a running counter following each cutter-cycling attempt made by the
printer. Follow the steps below (or consult the Operator's Manual, if necessary) to perform a functional
test of the Cutter:
A) Press the MENU Key on the printer's front panel.
B) Using the ↓ Key, scroll to DIAGNOSTICS then press the ENTER Key.
C) Using the ↓ Key, scroll to OPTIONS TESTING then press the ENTER Key.
Using the ↓ Key, scroll to TEST CUTTER then press the ENTER Key.
D)
E) Using the ↓ Key or the ↑ Key, select the number of test cycles (1, 10, or 100 times) that you want to perform.
F)
Press the ENTER Key to begin the test.
Note: At any time during the testing phase, press the CANCEL Key to terminate testing and return
to operating mode.
13
Advertisement
