Default Settings; User Sensitivity Default; User Frequency Default - UE Systems ULTRAPROBE 401 GREASE CADDY Manual

MENU 05 DEFAULT SETTINGS
To change this setting:
Enter set up mode and go to Menu 05.
Click the Sensitivity dial to select. The selections are "YES"
and "NO".
Spin to select, click to set.
To exit, press and hold the Sensitivity dial.
MENU 06 USER SENS.(SENSITIVITY) DFT (DEFAULT)
To change this setting:
Enter set up mode and go to Menu 06.
Click the Sensitivity dial to select. The default value is 70.
Spin to the desired value, click to set.
To exit, press and hold the Sensitivity dial.
MENU 07 USER FREQ.(FREQUENCY) DFT (DEFAULT)
To change this setting:
Enter set up mode and go to Menu 07.
Click the Sensitivity dial to select. The frequency range is 20 kHz to 100 kHz.
Spin to the desired frequency value, click to set.
To exit, press and hold the Sensitivity dial.
11