Memory Function - Permobil ICS seat 336632 User Manual

ICS seat
2.2.12

Memory function

ICS control panels equipped with memory can store and recall up to
three seat positions. A seat function (e.g. power tilt, power recline,
power legs, etc.) can only memorise a position if it has an actuator
with position feedback installed.
2.2.12.1 Return to a preset position
1. Enter memory mode by pressing and holding the memory
button (8) for two seconds. While in memory mode, the
memory LED flashes green.
2. Press and hold the appropriate Recall button (1, 2 or 3) to move
the seating system to the preferred preset position. As a safety
feature, releasing a Recall button stops actuator movement.
When the stored position is reached. the actuator movement
stops, the LED above the memory position lights up green and
the control panel beeps.
3. Return to standard seat function operating mode by pressing the
Memory button (8).
18
ICS seat control panel
Figure 13. Memory function.
Figure 14. Memory function.