Seat-To-Floor Function; Standing Function - Permobil ICS seat 336632 User Manual

ICS seat
2.2.7

Seat-to-floor function

The seat can be lowered to the floor by pressing the upper part of
the button, and raised by pressing the lower part.
2.2.8

Standing function

The seat can be raised to standing position by pressing the upper part
of the button, and lowered to sitting position by pressing the lower
part.
The standing function can be configured to suit each user by pre-
programming one of the three possible standing sequences.
The symbol on the left shows the standing sequence which starts by
straightening the user's hips and legs before raising the user to a
standing position. This sequence minimizes pressure on the user's
knees.
The symbol on the right shows the standing sequence which raises
the user directly from a sitting position.
16
ICS seat control panel
Figure 8. Seat to floor function.
Figure 9. Standing function.