IBM 9009-41A Manual page 101

b) Open the latch (A) by rotating it down and away from the card as shown in Figure 66 on page 87.
c) Slide the transceiver (B) out of the adapter hardware.
d) Repeat for the other transceiver.
Figure 66. Removing SFP transceivers from adapters
6. If necessary, remove the adapter from the antistatic package.
Attention: Avoid touching the components and gold connectors on the adapter.
Removing the tailstock from a new adapter
7. Ensure that you have the electrostatic discharge (ESD) wrist strap on and that the ESD clip is plugged
into a ground jack or connected to an unpainted metal surface. If not, do so now.
8. Using a Phillips screwdriver, unscrew the two retaining screws (A) that attach the high-profile
tailstock (B) to the new PCIe adapter, as shown in Figure 67 on page 88.
Installing, removing, and replacing PCIe adapters for the 9009-41A, 9009-42A, and 9223-42H system 87