IBM 9009-41A Manual page 20

See Figure 4 on page 6 or Figure 5 on page 7.
Notes:
• This system might be equipped with two or more power supplies. If the removing and replacing
procedures require the system power to be turned off, ensure that all the power sources to the
system are disconnected.
• The power cord (B) is fastened to the system with hook-and-loop fastener (A). If you are placing
the system in a service position after you disconnect the power cords, ensure that you unstrap
the fastener.
Figure 4. Removing the power cords from a rack-mounted server
6 Power Systems: PCIe adapters for the 9009-41A, 9009-42A, or 9223-42H