AEG DVD 4520 HDMI Instruction Manual page 54

9.2 VIDEO SETUP
Select Video in the setup menu, and display the Video submenu:
9.2.1 Aspect Ratio
4:3 : Choosing this setting if your DVD player is connected to a normal ratio TV. You can
fill the movie to the entire screen of your TV. This might mean that parts of the picture (the
left and right edges) won't be seen.
16:9 : Choose this setting if your DVD player is connected to a wide screen TV. If you
choose this setting and you don't have a wide screen TV, the images on the screen may
appear distorted due to vertical compression.
Notes:
The image display ratio is related to the recorded disc format. Some disc can not display
images in the aspect ratio you choose. If you play a disc recorded in 4:3 format on a wide
screen TV, black bars will appear on the left and right side of the screen. You must adjust
the screen setting depending on the type of the television you have.
9.2.2 View Mode
With this option you can select the different video vision mode on the screen.
9.2.3 TV System
This product supports output of various system, including AUTO, NTSC, PAL.
If your TV set has only NTSC or PAL system, the screen will blink and become colorless
when a wrong system is selected. In this case, press the N/P button on the Remote Control
to switch the TV TYPE..
Note: For more information of output format, refer to the instructions or your TV set.
9.2.4 Video Output
Selecting the Video Output setting to switch between different video outputs
Component :Set the video output to interlacing component output.
RGB: Set the video output to SCART output. If you select SCART connection, you
should set up the play mode as RGB state, then it will output normally.
GB-21