AEG DVD 4520 HDMI Instruction Manual page 48

Play/Pause
In play state, press the button for the first time and the player will be in pause state. To
resume normal playback press the button again, In pause state or stop state, press the
button, the player will be in playing state.
VOLUME +/-
Press VOL+ to increase volume and press VOL– to decrease volume.
Note: So you only change the volume output of the DVD player.
REPEAT
Each press of the REPEAT button will change the repeat mode.
During VCD,CD playback, there are three modes: repeat Single, repeat All and Off.
During DVD, playback, there are three modes: Repeat Chapter, Repeat Title and Off.
Note: During VCD playback, the PBC mode must be set to Off
A-B
During playback, press A-B to select point A, press it again to select point B. The player will
repeat the section from A to B automatically. Press A-B a third time to cancel A-B repeat
and clear points A and B.
Note: During CD/VCD/SVCD playback, points A and B must be within the same track.
During DVD playback, points A and B can be selected from different chapters.
ANGLE
Press the button to view scenes shot from ANGLE difference angles. (Disc support is
required)
MUTE
Press MUTE to turn off the audio, press MUTE again to resume normal sound.
L/R
During VCD/SVCD playback, press L/R repeatedly to select the channel of audio-output:
Left/Right/Mix/Stereo.
N/P
When stop state/no disc, press the button on the remote control and choose Auto NTSC
PAL for the TV system.
PBC
During VCD/SVCD playback, Press PBC to select the mode of PBC On or PBC Off.
SLOW
During DVD, VCD or SVCD playback, press SLOW for slow motion playback.
Once you press SLOW, the disc will play at different speed. Press PLAY to resume normal
GB-15