Installing/Removing The Bicycle Rack And Bicycle; Installing The Bicycle Rack On The Roof Bars - Audi Genuine Accessories 8T0.071.128 Installation Instructions Manual

5 Installing/removing the bicycle
rack and bicycle
5.1 Installing the bicycle rack on the roof
bars
Note
The bicycle rack as supplied from the factory is designed for
installation on the right-hand side of the vehicle. The bicycle
rack can be modified if installation on the left-hand side of the
⇒ „ Changing the installation direction — to
vehicle is required
make it easier to secure the bicycle on the left-hand side of the
vehicle" on page 14.
– Set the appropriate distance between the individual roof bars
-arrow a- by adjusting the movable bearing (rear) -6-.
WARNING
Make sure that the T groove screws marked -12- and -15-
(2x) are inserted fully into the grooves -E- — risk of
accident!
– Insert the bicycle rack T groove screws marked -12- and
-15- in the grooves -E- on the roof bars and slide the bicycle
rack into the required position parallel to the roof bars -
arrows b-.
– Align the bicycle rack such that the locating pins on the base
-arrow- slot into the T groove on the roof bars.
WARNING
The locating pins -arrow- must be positioned in the T
groove on the roof bars when the tensioning lever is
tightened; otherwise they could work loose and parts might
be lost — risk of accident!
Installation instructions - Bicycle rack

5 Installing/removing the bicycle rack and bicycle

Edition 03.2011
9