Call Control; Call Barring; Switch Call Barring On/Off; Set A Number To Be Barred - Motorola CD5 Series User Manual

6.

Call control

6.1

Call barring

Prevent certain numbers from being dialled from your phone. Store up to
four specific numbers, each up to 4 digits – for example, international or local
prefixes. Bypass Call barring by switching the setting to Off.
Note
If Call barring is switched on, when you make a call using a barred prefix the
screen will display
6.1.1

Switch call barring on/off

1. Press Menu, scroll
2. The display shows
3. Enter the master PIN (default setting 0000) and press OK.
4. The display shows
5. Press or to select
u d
6. Press e to return to standby. You can now set the number. (See below)
6.1.2

Set a number to be barred

1. Press Menu, scroll
2. The display shows
3. Enter the master PIN (default setting 0000) and press OK.
4. Scroll to Barring
d
5. If necessary, scroll
OK and enter the number or prefix you want to bar. Press Save.
6. Press
7. Press e to return to standby.
6.2

Call block

Your phone can block calls by call type or by number. Up to 50 numbers can
be blocked. For this feature to work, you must subscribe to a Caller ID service
from your network operator. A subscription fee may be payable. You can
access the call block menu by pressing
menu.
6.2.1

Block all international calls

1. Press .
2. Enter the master PIN (default setting 0000) and press OK.
3. The display shows
4. The display shows International, press OK.
5. Press or to select
u d
OK
6. Press to confirm or
Call control
Call barring on.
to Call control
d
Call Barring. Press OK.
Barring mode. Press OK.
On or Off and press OK.
to Call control
d
Call Barring. Press OK.
number. Press OK.
u or d to the next available slot.
By calltype, press OK.
On or Off.
Back
to return to the previous menu.
and press OK.
and press OK.
in standby or through the handset
29