Motorola CD5 Series User Manual page 13

With answering machine
Hide thumbs Also See for CD5 Series:
Table of Contents

Advertisement

Battery performance
In ideal conditions, fully charged batteries should give up to 18 hours talk time
or up to 300 hours standby time on a single charge.
Note that new batteries do not reach their full capacity until they have been
put to normal use for several days.
To keep your batteries in the best condition, leave the handset off the base for
a few hours at a time.
Running the batteries right down at least once a week will help them last as
long as possible.
The charge capacity of the rechargeable battery will reduce with time as it
wears out, giving the handset less talk / standby time. Eventually it will need to
be replaced.
After charging your handset for the first time, subsequent charging time is
about 6–8 hours a day. Batteries and the handset may become warm during
charging. This is normal.
Important
When fully charged batteries are removed and re-inserted, , the battery icon on the
display will reduce to 1 bar. The battery is still fully charged and the handset can be
used as normal. You can charge the handset again by replacing it on the base unit.
This is normal behaviour and is a reminder to charge the handset to prevents calls
being dropped. If the handset is powered off and on there will be no change to the
battery icon.
1
All talk and standby times are approximate and depend on features selected
and usage pattern.
Date and time
If you have subscribed to a Caller ID Service and Auto Clock is set to on (see
page 42), the date and time is set automatically for all handsets when you
receive your first call. If Auto Clock is set to off the time and date does not set
automatically.
If you do not have a Caller ID service, you can set the date and time manually.
Press Menu, scroll
1.
2. Scroll
to
Time & date
d
3. Enter the time using the 12 hour format HH:MM, e.g. 02:45, then scroll
to select AM or PM and press OK.
d
4. Enter the date using the format
2019 and press Save.
5. Press e to return to standby.
Your CD5 is now ready for use.
Getting started
Clock/Alarm
to
d
and press OK.
MM/DD/YYYY
1
and press OK.
e.g. 08/27/2019 for 27 August
or
u
13

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cd5011Cd5012Cd5013Cd5014

Table of Contents