Ram Ins / Supersolo - KETRON Audya Series User Manual

RAM Ins / Supersolo

RAM Ins / Supersolo
By pressing the RAM INS / SUPERSOLO button
in the VOICE section you can access the
screen where to select the SUPERSOLO voices,
described on page 19.
Creating and editing an INS block
By pressing the EDIT button you can access
the edit screen of the RAM INS / SUPERSOLO
voices ( . By using the F1-F10 buttons
Figure 241)
you can execute the following functions:
• F1 - CLEAR&LOAD: clears the current
memory and loads the selected INS voice(s).
• F2 - CLEAR SELECT.: clears the memory
only for the currently selected INS voice(s).
• F6 - CLEAR ALL: clears the memory of all
the INS voices.
• F7 - SAVE SELECT.: stores the currently
selected voices in one file (
a name by using the keyboard and press
the USER 5 button (SAVE) to store the INS
block.
In the example, the file is "MY_SUPERSOLO".
• F8 - AUTO LOAD OFF: enables/disables the
automatic loading into memory of an INS
block. To choose the autoload function of an
RBK file, just move to the RBK file and switch
the Auto Load parameter from OFF to ON.
Loading an INS block
INS
After storing the block, it will be on the internal
disc.
1. Press the RAM INS / SUPERSOLO button from
the front panel.
2. Scroll the files by using the CURSOR § ¶
buttons or the DATA/VALUE wheel and localize
the file "MY_SUPERSOLO .RBK" previously
stored on disc (Figure
3. Press ENTER on the front panel to load the INS
block and all its instruments at one time
244).
NOTE
While loading the INS voices, if there is not enough
room in memory, a warning message will appear
inviting to free one or more memory locations of INS
voices, by using the F2 button (CLEAR SELECT) or the F6
button (CLEAR ALL).
98
KETRON • AUDYA
. Give
Figure 242)
243).
(Figure
Figure 241
Figure 242
Figure 243
Figure 244
NOTE
When you can access to RAM INS section, you can find
the folder called SUPERSOLO, containing high quality,
exclusive for AUDYA, orchestral voices .