User Assignable - KETRON Audya Series User Manual

User Assignable

User Assignable
By pressing the USER ASSIGNABLE button,
located to left of the display, you can access the
screen where to assign custom functions to the
USER buttons (Figure
By using the F1-F5 buttons you can assign up
to five USER_TABS_PRES, that is five different
functions for the five User buttons below the
display. Press one of the F1-F5 buttons and the
EDIT button to access the screen like
379. Here you can assign to each USER button
one of the following functions:
FILL 1
FILL 2
FILL 3
FILL 4
FILL IN
BREAK 1
BREAK 2
BREAK 3
BREAK 4
BREAK
FILL TO ARR.
REINTRO
AUTO FILL
AFTER FILL
SWING BASS
BASS TO ROOT
BASS SUSTAIN
LOWER MUTE
LOWER OFF STOP
LOWER 1 HOLD
LOWER 2 HOLD
PIANIST SUSTAIN
MANUAL DRUM
CRASH
ONLY KICK
DRUM&BASS
KICK OFF
Use the F10 button to save the
USER_TABS_PRES in the current position.
By using the BACK and FORWARD buttons you
can add further 5 USER_TABS_PRES.
By using the buttons F6-F10 you can assign to
the USER slider the following functions:
F6 - PFL: sets the PRE FADER LISTEN volume
control.
F7 - WAVE FILTER: sets the USER slider to adjust the
cutoff frequency on WAVE Player. By pressing
repeatedly the button you can set the reverb send
on the RIGHT part or on the microphone.
F8 - CHORD 1 WHA-WHA: sets the
to adjust the cutoff frequency of the chord 1, in
order to produce a Wha-Wha effect. By pressing
140
KETRON • AUDYA
378).
Figure
SNARE OFF
HIHAT OFF
CYMBAL OFF
TOM/FX OFF
RIMSHOT OFF
LATIN 1 OFF
LATIN 2 OFF
LATIN 3 OFF
CLAP FX OFF
WHA-WHA
REVERB
CHORUS
ECHO/DELAY
DIST/OVERDRIVE
TEXT PAGE -
TEXT PAGE +
ARABIC 1... 10
RIGHT BOOST
STYLE STOP
DRYONSTOP
VOC. ON-OFF
ENDONSTOP
FILL TO END
UNPLUGGED
JUKEBOX
LEAD MUTE
SUB REG. UP-DOWN
USER slider
Figure 378
Figure 379
B
repeatedly the button you can set the same
function to CHORD 1, CHORD 2, CHORD 3,
CHORD 4, CHORD 5, BASS, ALL CHORDS, ALL
STYLE and RIGHT.
F9 - PORTAMENTO TIME: sets the
adjust the portamento time.
F10 - CHORD 2 CUTOFF: sets the
adjust the cutoff frequency of the chord 2. By
pressing repeatedly the button you can set the
same function to CHORD 1, CHORD 2, CHORD
3, CHORD 4, CHORD 5, BASS, ALL CHORDS,
ALL STYLE and RIGHT.
USER slider
to
USER slider
to