Gm Part - KETRON Audya Series User Manual

GM Part

When MIDI Player is playing back, you can open
the window to control the parts corresponding
to the MIDI tracks of the file (
pressing the GM PART button on the PLAY
CONTROL section.
By using the USER 1-5 buttons you can see the
pages where to set all the parameters of the
MIDI tracks of the file.
The USER buttons allow to edit the following
items:
GM PARTS
FILT. TX/RX
FILT. TO ALL
16 PARTS
UTILITY
▀ GM PARTS (USER 1)
By pressing GM PARTS (default selection),
the F1-F10 buttons allow to set the following
parameters:
F1–VOLUME
F2–REVERB
F3–CHORUS/DISTORTION/ECHO
F4–PAN
F5–MUTE
F6–SHIFT (+/- 36 semitones transposition)
F7–CHAN TX ON/OFF
F8–CHAN RX ON/OFF
F9–MODE (VOICE, VOCAL, DRUM)
F10–SOLO
You can change the GM part, that is the track of
the current MIDI file, by using the CURSOR Ó Á
buttons.
The parts stand in the middle of the screen as PART
01, PART 02... up to PART 16.
Please note that the F5 and F10 buttons set the
MUTE and SOLO functions of the part, respectively.
For each part you can change also the instrument
(Program Change) rotating the DATA/VALUE when no
F1-F10 buttons is selected. You can set a GM VOICE
and a SUPERSOLO previously loaded into RAM.
To deselect a F1-F10 button just press the same
button twice.
Transposition of the MIDI part
1. Select the part by pressing the CURSOR Ó Á
buttons. For example, select part 04.
2. Press the F6 button (SHIFT).
3. Turn the DATA/VALUE to set the value. In
205 the part is transposed by +12 semitones.
, by
Figure 204)
Figure
Figure 204
Figure 205
Figure 206
Setting the VOCAL mode
The melody part is, usually, on MIDI channel 4, so
you can set the VOCALIZER effect by turning the
DATA/VALUE wheel. When you select the VOCAL
mode for the MIDI file part, "MIDI MODE" appears in
the middle of the screen (Figure
press the VOCALIZER button on the VOICETRON
section, and the MIDI file track will drive the channel
of the voice, making double voices and choir effects.
1. Select the part by pressing the CURSOR Ó Á
buttons. For example, select part 04.
2. Press the F9 button (MODE).
3. Turn the DATA/VALUE to set the value by
Figure
selecting VOCAL (
4. Turn the button VOCALIZER on.
5. To edit the MIDI MODE, please see VOICETRON
section later in this manual.
GM Part
206). At this point,
206).
89
KETRON • AUDYA