Voice List - KETRON Audya Series User Manual

Voice List

By pressing the VOICE LIST button in the VOICE
section, the screen of the custom voices will
appear. For each of the 16 VOICES (the first two
rows) you can access the VOICE LIST button
with 20 memory locations each. In this way, you
can customize your favourite voice lists to be
used for each voice family.
▀ Storing a VOICE LIST
1. Select a group ( family sound) by press a VOICE
button ( i.e.EL. PIANO).
2. A screen like Figure 250
first ten memory locations.
3. Press the CURSOR Á to jump to the second
page and see the next ten EMPTY VOICE
locations.
4. By using the F1-F10 buttons, select an empty
memory location (Figure
5. If you want, you can replace the voice in that
location later.
6. Press the EDIT button. The VOICE LIST button
flashes.
7. Select any keys in the VOICE section. For
example, "EL. PIANO", if you want to stay in the
same family, but you can choose any other family,
of course.
8. By using the F1-F10 buttons and the CURSOR
Ó Á for page selection, select any voice. For
example, "FM_PIANO 2" on the second page of
"EL. PIANO" (Figure 252).
9. Press the ENTER button to confirm the selection.
10. If you want, choose further voices following the
same procedure from step 5 to step 7, changing
each time the memory location by using the F1-
F10 buttons and the CURSOR Ó Á , until you
finish your favourite VOICE LIST
11. Press SAVE, corresponding to the USER 5 button,
or press the SAVE button on the panel to store
the custom VOICE LIST.
12. Press the EDIT button to exit edit mode. The
VOICE LIST button will stop flashing.
13. At this point, if you press the VOICE LIST button,
you will display your custom list for each family of
the VOICE section.
will appear, showing the
251).
(Figure 253).
Voice List
Figure 250
Figure 251
Figure 252
Figure 253
KETRON • AUDYA
101