Voicetron - KETRON Audya Series User Manual

Voicetron

Voicetron
Once you connect two microphones to the
MICRO 1 and MICRO 2 connectors you can
access to a bunch of options for the voice
treatment.
▀ MICRO
The MICRO button enables the MICRO 1
input and MICRO 2 input. Connect one or two
microphones to the jacks on the rear and adjust
the level by using the GAIN 1 and GAIN 2 wheels.
▀ VOCALIZER
The VOCALIZER button enables the effect
processor for the harmonization and the
automatic pitch only on MICRO 1.
Setting a vocal effect
1. Press the MICRO button.
2. The MICRO PRESETS window will appear
339).
3. Press the F1-F10 buttons to select one of the
MICRO PRESETS, that is one effect for the
microphone connected to MICRO 1 and/or
MICRO 2.
4. Press the CURSOR Ó Á buttons to scroll the
MICRO PRESETS pages.
By using the F1-F10 buttons you can select
20 MICRO PRESETS from two pages:
PAGE 1
F1–DRY
F2–REVERB SMALL
F3–REVERB MEDIUM
F4–REVERB LARGE
F5–REVERB GATED
F6–BOOST
F7–ECHO REVERB
F8–ECHO REVERB TAP F8–MICRO_03
F9–CORRECTION
F10–BEAR
Editing a vocal effect
1. Select one MICRO PRESETS from the list on the
display.
2. Press the EDIT button on the front panel.
3. A window like Figure 340
4. By using the F1-F10 buttons you can select the
following options:
F1–MICRO1
F2–MICRO2
F3–REVERB
F4–ECHO
F5–TRANSFORM
F6–COMPRESSOR
F7–LIMITER
F8–EQUALIZER
F9–VIBRATO
F10–PITCH
130
KETRON • AUDYA
(Figure
PAGE 2
F1–GIRL
F2–BABY
F3–VIBRATO
F4–PHONE
F5–ANGEL
F6–MICRO_01
F7–MICRO_02
F9–MICRO_04
F10–MICRO_05
will appear.
Figure 339
Figure 340
Please note that for MICRO1 (that is the microphone
connected to MICRO 1 on the rear) all the options are
available, while for MICRO2, only REVERB and ECHO
are available.
MICRO1
By selecting the F1 button (MICRO1), you can choose
one of the following options:
F3–REVERB
F4–ECHO
F5–TRANSFORM
F6–COMPRESSOR
F7–LIMITER
F8–EQUALIZER
F9–VIBRATO
F10–PITCH
MICRO2
By selecting the F2 button (MICRO2), you can choose
one of the following options:
F3–REVERB
F4–ECHO