Table of Contents
Advertisement
Voicetron
The Voicetron section has one volume fader for
MICRO and one volume fader for VOCALIZER,
both with on/off LED button. Once you connect
a microphone to the MICRO 1 connector and/or
MICRO 2 connector, you can access to a wide
range of options for the voice processing.
MICRO
▀
The MICRO button enables both MICRO 1 and
MICRO 2 inputs. Connect one or two dynamic
microphones to the connectors on the rear panel
and adjust the gain level by using the GAIN 1 and
GAIN 2 small knobs on rear panel.
VOCALIZER
▀
The VOCALIZER button enables the multi-
processor effects for harmonization and
automatic pitch control only on MICRO 1 input.
Setting a vocal effect
▀
1.
Press the MICRO button.
2.
The screen where to choose the MICRO
PRESETS will appear
3.
Press the F1-F10 buttons to set one of the MICRO
PRESETS, that is an effect for the microphone
connected to MICRO 1 and/or MICRO 2 input.
4.
Press the CURSOR
Ó Á to scroll the MICRO
PRESETS pages.
By pressing the F1-F10 buttons you can
access two pages with ten MICRO PRESETS
each:
PAGE 1
F1–DRY
F2–REVERB SMALL
F3–REVERB MEDIUM
F4–REVERB LARGE
F5–REVERB GATED
F6–BOOST
F7–ECHO REVERB
F8–ECHO REVERB TAP F8–MICRO_03
F9–CORRECTION
F10–BEAR
B
(Figure
31).
PAGE 2
F1–GIRL
F2–BABY
F3–VIBRATO
F4–PHONE
F5–ANGEL
F6–MICRO_01
F7–MICRO_02
F9–MICRO_04
F10–MICRO_05
Voicetron
Figure 31
KETRON • AUDYA
25
Advertisement
Table of Contents
