Demco Reef Installation Instructions

Reef

Recommended Tools

Level
#2 Phillips Screw Driver

Package Contents

Top
End Panels
Step 1
Attach Stretcher Rails to End Panels
• Stand End Panels upright and attach Stretcher Rail
using 1 " bolts. Do not tighten bolts firmly until both
/
4
Stretcher Rails are in place.
• After both Stretcher Rails are placed, tighten bolts firmly.
Notice To Installers: Failure to comply with installation
instructions will compromise the safety, durability and
performance of this product, which may risk injury to the user
of this product and/or diminish the product life cycle. Jasper
Group assumes no liability in these instances.
Screw Gun
#2 Phillips Head Bit
Socket
Wrench
7 " Socket
/
16
Stretcher Rails
Insert bolts; Keep bolts
loose until both Stretcher
Rails are in place
3 " Hex Wrench
/
16

Hardware Used

Note: Two people are recommended for assembly.
Installation Instructions
Panel Table
#8 x 5 " Flat Head Wood Screws
/
8
#8 x 5 " Pan Head Wood Screws
/
8
1/4 x 1 " Machine Bolts
1/4 - 20 x 3 " Socket Head Cap Screws
/
4
(Used with Foot Rail option)
are in place.
Find Reef Tables @demco.com
Search: Reef Tables
Call 800.962.4463 or email custserv@demco.com
Page 1 of 3
Tighten bolts
firmly once both
Stretcher Rails