BDI STANCE 6650 Owner's Manual

STANCE
LIFT DESK
OWNER'S MANUAL
Product Registration
Registering your new BDI product allows us to send you important
product updates, service information and helpful hints related to your BDI
products. Register today, and you will be entered to win free a BINK table
from BDI: www.bdiusa.com/register
Placement and Maintenance
Stance ® Lift Desk is designed for indoor use on level floors. Clean glass
with glass cleaner, and steel parts and wood veneer with a damp cloth.
Your Stance Lift Desk is engineered for easy assembly. Carefully
®
follow this procedure to prevent any damage. Do not use power tools
for assembly of this product.
Step 1
Unpack and identify the parts listed below. The assembly workspace
should be a non-marring surface such as carpet. For missing hardware
pieces, please contact BDI Customer Service at customerservice@bdiusa.
com. For all other concerns, please contact your BDI retailer.
C5 Foot x 2
Designed by BDI Studio
These distinctive product configurations are protected by US and international patents, trade dress, and/or
copyright laws. Stance & BDI are trademarks of Becker Designed, Inc. All rights reserved. ©2019, BDI
Made in Turkey & China. 12.03.2019 V4
®
6650/6651/6652
C2 Keypad x 1
C3 Leg x 2
bdiusa.com
customerservice@bdiusa.com
T1 4mm Hex Wrench
H1 Wood Screw x 12
H2 Long Wood Screw x 2
H3 M6 x 12mm Screw x 10
H4 M6 x 16mm Flathead
Screw x 8
H6 Wire Clip x 6
H8 Cord Wrap x 2
A1 Main Panel x 1
C1 Control Module x 1
C7 Cord Conduit x 1
C8 Wire Tray Panel x 1
C9 Wire Tray Shelf x 1
C6 Power Cord x 1
Tool Required:
Phillips Screwdriver