Potential Problems And Their Resolution - Kalkomat COMBO PRIZE Technical Information

8. Potential problems and their resolution

All the tests and repairs have to be
done by service workers authorized
by the manufacturer. Ask your
supplier for assistance.
Main board is not functioning:
1 Check all fuses (5A).
2 Check connection between transformer and the main board.
3 Make sure that connectors are well seated.
4 The main display can be checked by turning the switch # 1 to "ON"
position then turning machine off and back on.
Coin Acceptor is not functioning:
1 Check if it is not plugged up.
2 Check for dust and dirt.
3 Check strip connecting main board with the acceptor.
Mechanism is not functioning:
1 Using just power supply check if it is possible to lower punching
bag (using SOLENOID TEST on the right side of main board).
2 Check for burned fuse 25A (left side of the main board)
3 Check button functionality and if they have proper connection.
4 Check for unhooked cable from power supply spools.
5 Check strip connecting main board with the power supply
(transformer).
Sensor is not functioning:
1 Check sensors in diagnostic mode (go to menu to DIAGNOSTIC
MODE then SENSOR TEST Hi Lo. If punching bag is moving UP /
15