Ihse Draco MultiView 4K60 MV42 Series User Manual page 71

Draco Multiview 4K60
The following parameters can be configured:
Field
Name
Default EDID
No Signal Color
To configure the settings for a video output, proceed as follows:
1. Select Input & Output Controls > Output Control in the task area.
2. Select the video input to be configured in the list Output Devices.
3. Modify the desired settings.
4. Confirm your entries by pressing the Apply button.
Entry Description
Text Optional: Individual name for video inputs (case sensitive)
Note: An individual name can consist of up to 32
characters.
List MONITOR
1080p60
4K30
4K60
List Background color if no video signal is available
Configuration via Management Software
When the Draco MV is restarted or a
monitor is plugged in during operation, the
monitor's EDID is read out and transmitted
to the CPU inputs.
The video signal is always displayed with
the resolution of the monitor.
When the Draco MV is restarted or a
monitor is plugged in during operation, the
video signal is always displayed with the
preset resolution.
71