Ihse Draco MultiView 4K60 MV42 Series User Manual page 25

Draco Multiview 4K60
'Hot Key'-Code
The 'Hot Key' to enter command mode can be changed. The following table lists the 'Hot Key'
codes for the available 'Hot Keys'.
'Hot Key'-Code
0
2
3
4
5
6
7
8
When installing the Draco MV with additional KVM devices (e.g. matrix, extender or U-Switch)
different 'Hot Keys' for the individual devices have to be defined.
Set freely selectable 'Hot Key' (exemplary)
To set a freely selectable 'Hot Key' (e.g. 2x <Space>), use the following keyboard sequence:
<current 'Hot Key'>, <c>, <0>, <Space>, <Enter>
Set 'Hot Key' for direct OSD access
Next to the 'Hot Key' for standard functions, a second 'Hot Key' can be exclusively set for opening
the OSD directly.
To select a 'Hot Key' from the 'Hot Key' table for a direct opening of the OSD, use the following
keyboard sequence:
<current 'Hot Key'>, <f>, <'Hot Key'-Code>, <Enter>
To select a freely selectable 'Hot Key' (e.g. <Space>) for opening OSD directly, use the following
keyboard sequence:
<current 'Hot Key'>, <f>, <0>, <Space>, <Enter>
Delete 'Hot Key' for direct OSD access
To delete the 'Hot Key' for direct OSD access, use the following keyboard sequence
<aktueller 'Hot Key'>, <f>, <0>, <Del>, <Enter>
Reset 'Hot Key'
To set a 'Hot Key' back to default settings, press the key combination <Right
Shift> + <Del> within 5 s after plugging in a keyboard.
'Hot Key'
Free selectable
2x <Scroll>
2x <Left Shift>
2x <Left Ctrl>
2x <Left Alt>
2x <Right Shift>
2x <Right Ctrl>
2x <Right Alt>
NOTICE
Description
25