Ihse Draco MultiView 4K60 MV42 Series User Manual page 44

Configuration via OSD
Configuring the time server
To configure a time server, proceed as follows:
1. Select Configuration > Date+Time in the main menu.
2. Set the SNTP Client option to Y (Yes).
3. Enter the IP address of your SNTP server in the SNTP Server field.
4. Select your time zone in the Time Zone field.
5. Press the Okay button to confirm your settings.
6. Restart the Draco MV. The system time will be now provided by the SNTP server.
Configuring the real time clock without time server
To set the real time clock without using SNTP, proceed as follows:
1. Select Configuration > Date+Time in the main menu.
2. Set the current date in the Date field
3. Set the current Day in the Day field.
4. Set the current time in the Time field.
5. Press the RTC button to confirm your settings.
The real time clock will be now provided.
44
Draco Multiview 4K60