Configuration via Management Software
Offline Mode
Configuration and system settings via management software can be changed in offline mode
without a direct connection between Draco MV and management software. Afterwards, the
configuration has to be uploaded to the Draco MV. Hereby, the following steps are necessary:
1. Connect the management software with the Draco MV.
The manufacturer-specific configuration (Factory Setting) saved on the Draco MV) is loaded
into management software.
2. Download configuration.
3. Close connection from the management software to the Draco MV.
4. Activate edit mode.
5. Configure system settings and confirm changes.
6. Deactivate edit mode.
7. Upload configuration to the Draco MV and activate immediately (optional) or later.
8. Restart the system.
54
Draco Multiview 4K60